Walton WD215I10 21.5-inch FHD IPS 100Hz Monitor with Speakers

Walton WD215I10 21.5-inch Full HD IPS 100Hz Monitor with Speakers

Model identity and official source

Walton WD215I10 is a CiNEXA 21.5-inch Full HD IPS monitor with built-in speakers. Walton’s product page identifies the model, 1920 × 1080 display, HDMI/VGA/audio out/DC power connections, two 2W speakers and its warranty schedule. Bangladesh retailers describe a 100Hz version, while Walton’s official page lists “75Hz / 100 Hz”, indicating mode or revision ambiguity. Confirm the actual unit and its display settings if a specific refresh mode matters. Keep this page focused on WD215I10; WD215I09 is a separate model with different connections and must not be substituted.

Screen and image format

Walton lists a 21.5-inch IPS LED-backlit panel with Full HD 1920 × 1080 resolution. That pixel count is mathematically a 16:9 format; one Walton page lists 17:9, which conflicts with the stated resolution and common exact-model retailer specs. The catalog uses 16:9 and records the manufacturer page discrepancy instead of repeating the apparent ratio typo. A Full HD image provides a widescreen desktop for documents, browsing, video and general work. Set the computer to 1920 × 1080 for native resolution. The 21.45-inch wording used by some local sellers is a rounded/active-size variant; Walton’s own product page says 21.5 inches.

Panel, brightness and color

Walton describes an IPS panel, 300 cd/m² brightness, 1000:1 contrast, 178° horizontal/vertical viewing angles, 16.7 million colors and 85% NTSC gamut. These are manufacturer-listed specifications, not independent measurements of the BiponiBD unit. IPS technology supports broad stated viewing angles, while brightness and color experience depend on settings, room lighting and the source material. The anti-glare surface is listed by local sellers. The product information does not establish factory calibration, HDR support or suitability for color-critical work. If accurate color reproduction is important, check independent testing of the exact production variant and use a calibrated workflow.

Refresh and response

Retailers list 100Hz and 5ms response for WD215I10, but Walton’s official page presents refresh rate as “75Hz / 100 Hz”. That discrepancy may reflect mode, revision or page data; it should not be silently collapsed into a guarantee for every shipped unit. The product copy identifies the retailer-listed 100Hz maximum while advising buyers to verify available modes on the delivered unit. The 5ms value is also a published specification, not an input-lag measurement. Confirm the computer, HDMI/VGA connection, cable and display settings support the desired resolution and refresh rate. Do not claim 120Hz: pages for newer or revised products sometimes market different rates under the same family name.

Audio and connections

Walton lists HDMI, VGA, audio out and DC power connections. The WD215I10 has two built-in 2W speakers, according to Walton’s official product information. This is a genuine distinction from some competing monitors that omit speakers; audio volume and quality still depend on content, settings and the compact monitor speaker design. The available audio-out connection is useful when connecting headphones or external sound equipment, but confirm the exact rear-panel connectors on the delivered unit. A source computer may require HDMI, VGA or a compatible adapter. The separate WD215I09 model has additional connection types; do not copy its USB-C or DisplayPort claims onto this WD215I10 page.

Eye-care and adaptive features

Walton lists Flicker Free, Low Blue Light and FreeSync support. These are manufacturer product features; they are not medical promises or proof of a particular independent certification. FreeSync availability and compatible range should be verified for the exact unit, graphics hardware and connection before relying on variable refresh. The monitor also has an anti-glare surface according to retailer specifications. Adjust brightness for the room, reduce reflections, maintain a comfortable viewing distance and take breaks during long sessions. Eye-care labels do not prevent fatigue for every user or replace ergonomic setup.

Stand, VESA and finish

Walton lists tilt adjustment from -5° to +15° and a 75 × 75mm VESA mounting pattern. The catalog’s black finish matches seller descriptions and the saved gallery’s black monitor render. The VESA statement does not mean a wall bracket is included. Height, swivel and pivot adjustments are not listed. Confirm mounting hole positions and screw requirements on the exact production unit before using an arm. Place the stand on a stable surface and allow space for its footprint and cable routing. The available public product data does not provide enough reliable information to present all assembled dimensions with confidence.

Pixel pitch and dimensions checked carefully

The existing catalog attribute showed pixel pitch as “249.3 × 241”, which is not a plausible millimetre pitch for a 21.5-inch Full HD panel and resembles mixed units or a data-entry issue. Walton’s official page repeats that string, but does not define the units clearly. Because a physical pixel pitch should be a sub-millimetre spacing, this field now flags the manufacturer listing as ambiguous rather than presenting it as verified millimetres. Some retail pages list dimensions around 492 × 281 × 7.6mm, but do not consistently say whether these exclude the stand or refer only to the panel body. Confirm assembled dimensions from the unit manual if desk or mount clearance is critical.

Power supply

Walton specifies a DC 12V, 2.5A adapter, with AC input from 100–240V and maximum power consumption of 30W; standby is listed at 0.5W. Use the supplied adapter and check its label for the exact unit. A connector that fits is not enough to establish correct voltage or polarity. Keep the adapter dry, use an appropriate outlet and route cables so they are not pinched. The power ratings describe the published model specification rather than measured energy use for an individual customer.

Warranty and Bangladesh offer

Walton’s official warranty schedule lists three years for motherboard, panel and other parts, and one year for the adapter/power supply board, with policy terms and exclusions. Bangladesh retailers commonly advertise three years but some summarize the full warranty too broadly. The saved BiponiBD field says three-year service warranty with three years for the panel and one year for adapter; this is close to Walton’s published breakdown but should be confirmed against the shipped warranty card and serial. The catalog price is BDT 8,999 and status Active; those saved fields do not establish live stock, delivery coverage or the checkout total. Confirm current BiponiBD terms before ordering.

Price context and model distinction

Current local seller listings for WD215I10 commonly range around BDT 8,499–9,700, with offers and regular prices differing. Some retailers advertise 100Hz while other pages show 120Hz; Walton’s own WD215I10 page says 75Hz / 100Hz. Treat 120Hz reports as a possible listing/revision mismatch and do not claim it here. WD215I09 has different connection options and must remain separate. Competitor prices and stock change independently and are not used as BiponiBD offer evidence. Match the exact model code on the product page, invoice and rear label before depending on refresh behavior, ports or warranty.

Use cases and trade-offs

A Full HD IPS screen with two 2W speakers, HDMI, VGA and audio out can work for home or office tasks, online video, study and general desktop use. Walton’s listed 100Hz mode may provide smoother supported motion than 60Hz, but the official refresh line has a 75/100Hz ambiguity and should be checked for the shipped revision. The built-in speakers may be convenient for basic sound without separate desktop speakers. Trade-offs include limited stand adjustment, the unusual pixel-pitch and dimension data, refresh-rate uncertainty and no confirmation of BiponiBD stock or specific adapter warranty beyond the saved catalog terms. Buyers should weigh these against their actual connections and desk needs.

Setup and care

Place the monitor on a stable desk and connect the supplied 12V/2.5A adapter only after checking its label. Select HDMI or VGA input according to the computer and set 1920 × 1080 in operating-system display controls. Check the refresh-rate menu for the actual unit; choose 100Hz only when the monitor, source, port and cable expose that mode. Test the speakers and audio out at a comfortable level. Adjust tilt within the stated -5° to +15° range. Clean the screen gently as described in the manual, avoid pressure on the panel and do not spray liquid directly onto it. Retain the serial label, invoice and warranty documents.

Source and non-inference note

This audit checked Walton’s official WD215I10 product page and multiple Bangladesh retailer pages on 2026-11-03. Official sources support the IPS Full HD display, speaker, ports, 300 cd/m², power and warranty claims. Refresh rate is shown as 75Hz/100Hz by Walton, while sellers sometimes state 100Hz or 120Hz; the catalog copy flags the inconsistency. Aspect ratio is set to 16:9 based on the stated 1920 × 1080 resolution, while Walton’s 17:9 text is noted as inconsistent. Pixel pitch and dimensions remain qualified. Public sources do not prove the BiponiBD unit’s live stock, final price, exact revision, warranty card, batch origin or media rights.

Frequently asked questions

What screen size and resolution does WD215I10 have?

Walton identifies a 21.5-inch IPS LED-backlit display with Full HD 1920 × 1080 resolution. Some Bangladesh sellers use 21.45-inch wording.

Is the aspect ratio 16:9 or 17:9?

1920 × 1080 pixels mathematically form 16:9, which is also used by exact-model retailers. Walton’s page shows 17:9, an apparent data inconsistency; this catalog uses 16:9 and records that conflict.

Does this monitor support 100Hz?

Walton lists “75Hz / 100 Hz”; local retailers often advertise 100Hz, while some pages claim 120Hz. Confirm the actual revision and available mode on the delivered unit.

What is the response time?

Walton and local retailers list 5ms. This is not an input-lag measurement.

Does it include speakers?

Yes. Walton lists two built-in 2W speakers.

What ports does it have?

Walton lists HDMI, VGA, audio out and DC power. Confirm the exact rear panel on the unit.

What is the brightness and color gamut?

Walton lists 300 cd/m² brightness, 85% NTSC, 16.7 million colors and 1000:1 contrast. These are manufacturer specifications, not a unit measurement.

Does it support FreeSync and eye-care features?

Walton lists FreeSync, Flicker Free and Low Blue Light. Confirm graphics compatibility and supported operating modes; these features do not guarantee a medical outcome.

Can I mount it on a wall or arm?

Walton lists 75 × 75mm VESA mounting. Verify the exact unit and bracket hardware; a mount is not confirmed as included.

What is wrong with the pixel-pitch value shown online?

Some pages list “249.3 × 241” without clear units. That is not a plausible millimetre pixel pitch, so it is flagged as ambiguous rather than presented as a verified physical measurement.

What warranty applies to this unit?

Walton lists three years for panel/motherboard/other parts and one year for adapter/power supply board. Confirm the shipped warranty card, local provider and serial eligibility with BiponiBD.

What are the price and stock status?

The saved BiponiBD record shows BDT 8,999 and Active. That does not independently confirm live physical stock, delivery availability or today’s checkout total.